COLORFUSION® Headlight Protection Tint — Dark Smoke

• Removable - 7.5 mils Thermoplastic Polyurethane Tint
• Ultra-Gloss® finish
• Nano air-release embossed PET liner
• Horizontal longevity 3-4 years
• Vertical longevity 5-7 years
• Self-Healing properties & Scratch Resistance

*Should be stored in any temperature not exceeding 27 degree celsius. Product and liner are completely waterproof, humidity is not an issue.

INSTALLATION:

Ensure lenses are in good condition. Inspect closely for "micro-cracks" in the lense, these are caused from minor collisions, age/wear and using the wrong aftermarket bulbs that can overheat the casing and lead to damaged lense. Micro-cracks can causing the film to bubble in certain areas.  Aftermarket bulbs(excluding LED bulbs) have been known to overheat the lense also causing bubbling from gas being leached from the plastic casing. Clean the surface with a plastic-safe detergent that will remove grease, wax and other contaminants from the surface. If surface is not completely smooth to touch, use a clay bar to remove any stubborn bits that may show through the tint.

Ensure there is 3-6 inches of excess material around the lense for easier handling.

Although it is not necessary, it is recommended to use a masking tape around the headlight which allows for stretch-free tucking on the edges ensuring a reliable application for years to come.

Once material has been installed and cut, go over the edges with a heat gun to rid the material of any stress embedded in the film from stretching.